- This topic has 18 replies, 6 voices, and was last updated 18 years, 6 months ago by Riyad Kalla.
-
AuthorPosts
-
markjohanssonMemberHi, I just upgraded from ME4.1GA to ME4.1.1GA
Recently I reverted to ME4.1GA but the repository is no longer viewable
I’ve included some information below. Is this a bug in MyEclipse?
The error on Eclipse Window:
===================
Unable to create this part due to an internal error. Reason for the failure: An exception was thrown during initializationThe .log
======
!ENTRY org.eclipse.ui 4 0 2006-03-12 13:12:41.536
!MESSAGE Unable to create editor ID com.genuitec.eclipse.uml.editor.UMLEditor: An exception was thrown during initialization
!STACK 0
java.lang.NullPointerException
at com.genuitec.eclipse.uml.editor.UMLEditor.init(UMLEditor.java:763)
at org.eclipse.ui.internal.EditorManager.createSite(EditorManager.java:773)
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:572)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:365)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:552)
at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:214)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2325)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2258)
at org.eclipse.ui.internal.WorkbenchPage.access$9(WorkbenchPage.java:2250)
at org.eclipse.ui.internal.WorkbenchPage$9.run(WorkbenchPage.java:2236)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2231)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2212)
at org.eclipse.ui.ide.IDE.openEditor(IDE.java:371)
at org.eclipse.ui.ide.IDE.openEditor(IDE.java:334)
at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:251)
at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:131)
at org.eclipse.jdt.internal.ui.actions.OpenActionUtil.open(OpenActionUtil.java:49)
at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:169)
at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:153)
at org.eclipse.jdt.ui.actions.SelectionDispatchAction.dispatchRun(SelectionDispatchAction.java:222)
at org.eclipse.jdt.ui.actions.SelectionDispatchAction.run(SelectionDispatchAction.java:198)
at org.eclipse.jdt.internal.ui.packageview.PackageExplorerActionGroup.handleOpen(PackageExplorerActionGroup.java:296)
at org.eclipse.jdt.internal.ui.packageview.PackageExplorerPart$4.open(PackageExplorerPart.java:869)
at org.eclipse.jface.viewers.StructuredViewer$2.run(StructuredViewer.java:741)
at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
at org.eclipse.core.runtime.Platform.run(Platform.java:783)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:44)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:148)
at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:739)
at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:968)
at org.eclipse.jface.viewers.StructuredViewer$6.handleOpen(StructuredViewer.java:1067)
at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:243)
at org.eclipse.jface.util.OpenStrategy.access$2(OpenStrategy.java:238)
at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:277)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1021)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2867)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2572)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1699)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1663)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143)
at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103)
at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
at org.eclipse.core.launcher.Main.run(Main.java:973)Configuration Summary:
================
*** Date: Sun Mar 12 14:09:07 SGT 2006*** System properties:
OS=Linux
OS version=2.6.12-1.1381_FC3
Java version=1.5.0_06*** MyEclipse details:
MyEclipse Enterprise WorkbenchVersion: 4.1.0 GA
Build id: 20060122-4.1-GA*** Eclipse details:
Eclipse SDKVersion: 3.1.0
Build id: I20050627-1435Eclipse Platform
Version: 3.1.0
Build id: I20050627-1435Eclipse RCP
Version: 3.1.0
Build id: I20050627-1435Eclipse Java Development Tools
Version: 3.1.0
Build id: I20050627-1435Eclipse Plug-in Development Environment
Version: 3.1.0
Build id: I20050627-1435Eclipse Project SDK
Version: 3.1.0
Build id: I20050627-1435Eclipse startup command=-os
linux
-ws
gtk
-arch
x86
-launcher
/opt/tools/eclipse-myeclipse/eclipse
-name
Eclipse
-showsplash
600
-exitdata
518000
-vm
/opt/sdks/jdk1.5.0_06/bin/java
Kapil KapreMembermark,
Are you using a trial license if so, please re-download 4.1.1 and that should sort you out. If not try recovering your UMR from the backup file “.umr~” (rename to .umr)
markjohanssonMemberHi
I just upgraded to Pro version (4.1.1), previously I used standard (4.1). These’re the steps I’ve taken:
1. removed eclipse and re-installed
2. run $ECLIPSE_HOME/eclipse -clean
3. removed old workspace, use a new workspaceUnfortunately, I removed *.umr~ since it looks like orphan
I saw the documentation on myeclipse home page on the steps to uninstall ME but I use a manual install.
When I tried to create a new UML repository, I get:
!ENTRY com.genuitec.eclipse.jsf 1 0 2006-03-16 21:51:16.138
!MESSAGE
!STACK 0
java.lang.NullPointerException
at org.eclipse.jdt.internal.core.TypeVector.contains(TypeVector.java:56)
at org.eclipse.jdt.internal.core.hierarchy.TypeHierarchy.contains(TypeHierarchy.java:333)
at com.genuitec.eclipse.jsf.validation.ClassNamesValidationRule.classExtends(ClassNamesValidationRule.java:95)
at com.genuitec.eclipse.jsf.validation.ClassNamesValidationRule.validateClass(ClassNamesValidationRule.java:221)
at com.genuitec.eclipse.jsf.validation.ClassNamesValidationRule.validateClass(ClassNamesValidationRule.java:170)
at com.genuitec.eclipse.jsf.validation.ClassNamesValidationRule.validateClass(ClassNamesValidationRule.java:187)
at com.genuitec.eclipse.jsf.validation.ClassNamesValidationRule.validateConverter(ClassNamesValidationRule.java:245)
at com.genuitec.eclipse.jsf.modeler.model.JSFConfig.runValidationRule(JSFConfig.java:254)
at com.genuitec.eclipse.jsf.validation.ValidationBuilder$RuleRunner.run(ValidationBuilder.java:31)
at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
at org.eclipse.core.runtime.Platform.run(Platform.java:783)
at com.genuitec.eclipse.jsf.validation.ValidationBuilder.validateProject(ValidationBuilder.java:70)
at com.genuitec.eclipse.jsf.validation.ValidationBuilder.build(ValidationBuilder.java:53)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:593)
at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
at org.eclipse.core.runtime.Platform.run(Platform.java:783)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:168)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:202)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:231)
at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
at org.eclipse.core.runtime.Platform.run(Platform.java:783)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:234)
at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:253)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:282)
at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:139)
at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:200)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:76)
Riyad KallaMemberMark,
The steps you took to a fresh install of Eclipse are the same steps you need to do for MyEclipse. You mentioned upgrading then downgrading back to version 4.1 GA, unless you were using the update manager OR uninstalling/reinstalling clean copies to a clean dir, it’s possible you have corrupted your install, *especially* if you simply were unzipping copies of MyEclipse ontop of itself.
aromuMemberHi,
I’m evaluating the MyEclipse 4.1.1GA_E3.1 on Linux environment and was working with the UML editor. Then I made a mistake, closed the file without saving and tried to open it again with the UML editor. Here’s the result:
java.lang.IllegalArgumentException: at org.eclipse.core.internal.runtime.Assert.isLegal(Assert.java:58) at org.eclipse.core.internal.runtime.Assert.isLegal(Assert.java:42) at org.eclipse.core.runtime.Status.setMessage(Status.java:174) at org.eclipse.core.runtime.Status.<init>(Status.java:81) at org.eclipse.ui.WorkbenchException.<init>(WorkbenchException.java:38) at org.eclipse.ui.PartInitException.<init>(PartInitException.java:36) at com.genuitec.eclipse.uml.editor.UMLEditor.init(UMLEditor.java:763) at org.eclipse.ui.internal.EditorManager.createSite(EditorManager.java:778) at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:596) at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:384) at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:552) at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:283) at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:126) at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:269) at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65) at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:391) at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1102) at org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1051) at org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1256) at org.eclipse.ui.internal.PartStack.add(PartStack.java:442) at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:109) at org.eclipse.ui.internal.EditorSashContainer.addEditor(EditorSashContainer.java:60) at org.eclipse.ui.internal.EditorAreaHelper.addToLayout(EditorAreaHelper.java:212) at org.eclipse.ui.internal.EditorAreaHelper.addEditor(EditorAreaHelper.java:202) at org.eclipse.ui.internal.EditorManager.createEditorTab(EditorManager.java:758) at org.eclipse.ui.internal.EditorManager.openEditorFromDescriptor(EditorManager.java:665) at org.eclipse.ui.internal.EditorManager.openEditor(EditorManager.java:628) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2360) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2295) at org.eclipse.ui.internal.WorkbenchPage.access$9(WorkbenchPage.java:2287) at org.eclipse.ui.internal.WorkbenchPage$9.run(WorkbenchPage.java:2273) at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2268) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2249) at org.eclipse.ui.ide.IDE.openEditor(IDE.java:371) at org.eclipse.ui.ide.IDE.openEditor(IDE.java:334) at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:251) at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:131) at org.eclipse.jdt.internal.ui.actions.OpenActionUtil.open(OpenActionUtil.java:49) at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:169) at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:153) at org.eclipse.jdt.ui.actions.SelectionDispatchAction.dispatchRun(SelectionDispatchAction.java:222) at org.eclipse.jdt.ui.actions.SelectionDispatchAction.run(SelectionDispatchAction.java:198) at org.eclipse.jdt.internal.ui.packageview.PackageExplorerActionGroup.handleOpen(PackageExplorerActionGroup.java:296) at org.eclipse.jdt.internal.ui.packageview.PackageExplorerPart$4.open(PackageExplorerPart.java:869) at org.eclipse.jface.viewers.StructuredViewer$2.run(StructuredViewer.java:741) at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044) at org.eclipse.core.runtime.Platform.run(Platform.java:783) at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:44) at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:148) at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:739) at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:968) at org.eclipse.jface.viewers.StructuredViewer$6.handleOpen(StructuredViewer.java:1067) at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:243) at org.eclipse.jface.util.OpenStrategy.access$2(OpenStrategy.java:238) at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:277) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1021) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2867) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2572) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1699) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1663) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143) at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103) at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334) at org.eclipse.core.launcher.Main.basicRun(Main.java:278) at org.eclipse.core.launcher.Main.run(Main.java:973) at org.eclipse.core.launcher.Main.main(Main.java:948)
Riyad KallaMemberaromu,
Try restarting using the -clean command line argument, almost make sure you are using Eclipse 3.1.2 and JDK 1.5.0_06 on Linux for the most stable UML operation.
aromuMemberHi and thanks for your reply rkalla
I tried the -clean command line argument in two ways. Added it to the parameters in MyEclipse.sh and also tried just startting eclipse with ./eclipse -clean The problem still persists.
When I installed MyEclipse evaluation version I installed clean version of Eclipse (Version: 3.1.2
Build id: M20060118-1600) and I’m running it on Sun JDK:java version "1.5.0_06" Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05) Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode, sharing)
aromuMemberI was able to open the diagram using ArgoUML 0.20 when I renamed the UML repository file to ArgoUML project .zargo
Propably I just go for the ArgoUML for now but i would be interested to solve the problem with MyEclipse also.
Best Regards:
Aapo
djhillMemberI encountered the same problem this week. Perhaps this info will assist in locating the underlying cause.
I was adding comments to a use case to document scenarios by selecting the use case and then adding a comment. At one point a comment became disconnected from its link, and eventually disappeared altogether. The link was still there, however, but only connected on one end (the use case), and could not be deleted. I then tried adding another (unassociated) comment, thinking I could then connect the link to it, but while I could drag the loose end of the link around it would not attach to the comment.
I continued to work for several hours on other diagrams with no problems. When I tried to reopen the model the next day, I got the null pointer exception, which I presume to be caused by the loose end of the disconnected link. [IMHO, the editor chould catch and handle this, probably by deleting the offending object.]
I couldn’t open the backup either, and couldn’t even delete the UMR because it was “out of synch with the file system.” [who cares? let me delete it anyway!]
In the end I had to delete the project, delete the model files, recreate the project, and then create a new model.
I’m using the following versions:
Eclipse:
Version: 3.1.1
Build id: M20050929-0840myEclipse: 4.1.1GA
WinXPSp2
Riyad KallaMemberdjhill,
I’m sending this report to our UML team, this is a big problem if this is what happened to you.
djhillMemberI could try to recreate it. Are there any diagnostic or logging facilities I can enable? I can’t find any relevant settings in the preferences.
…Jeff
Riyad KallaMemberJeff there aren’t any but the log file (<workspace dir>\.metadata\.log) should help fine critical exceptions.
djhillMemberOK, here’s the relevant portion of the log file. It looks like it caught some exceptions when I was trying to connect the link to the new comment, and when I tried to delete it.
!ENTRY org.eclipse.update.configurator 2006-05-21 10:26:53.261 !MESSAGE Can't find bundle for base name feature, locale en_US !SESSION 2006-05-21 11:17:34.695 ----------------------------------------------- eclipse.buildId=M20050929-0840 java.version=1.5.0_06 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US Command-line arguments: -os win32 -ws win32 -arch x86 !ENTRY com.genuitec.eclipse.uml 1 0 2006-05-21 15:47:40.347 !MESSAGE !STACK 0 java.lang.IllegalArgumentException: Don't know how to create FigEdge for model type ru.novosoft.uml.foundation.core.MCommentImpl at org.argouml.uml.diagram.use_case.ui.UseCaseDiagramRenderer.getFigEdgeFor(UseCaseDiagramRenderer.java:236) at com.genuitec.eclipse.uml.editor.undo.MementoViewModelEvent.restoreState(MementoViewModelEvent.java:184) at com.genuitec.eclipse.uml.editor.undo.UndoManager.performActualUndo(UndoManager.java:269) at com.genuitec.eclipse.uml.editor.undo.UndoManager.access$0(UndoManager.java:260) at com.genuitec.eclipse.uml.editor.undo.UndoManager$2.run(UndoManager.java:204) at java.awt.event.InvocationEvent.dispatch(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) !ENTRY com.genuitec.eclipse.uml 1 0 2006-05-21 15:47:40.397 !MESSAGE !STACK 0 java.lang.reflect.InvocationTargetException at java.awt.EventQueue.invokeAndWait(Unknown Source) at javax.swing.SwingUtilities.invokeAndWait(Unknown Source) at com.genuitec.eclipse.uml.editor.undo.UndoManager$1.run(UndoManager.java:201) at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:113) Caused by: java.lang.IllegalArgumentException: Don't know how to create FigEdge for model type ru.novosoft.uml.foundation.core.MCommentImpl at org.argouml.uml.diagram.use_case.ui.UseCaseDiagramRenderer.getFigEdgeFor(UseCaseDiagramRenderer.java:236) at com.genuitec.eclipse.uml.editor.undo.MementoViewModelEvent.restoreState(MementoViewModelEvent.java:184) at com.genuitec.eclipse.uml.editor.undo.UndoManager.performActualUndo(UndoManager.java:288) at com.genuitec.eclipse.uml.editor.undo.UndoManager.access$0(UndoManager.java:260) at com.genuitec.eclipse.uml.editor.undo.UndoManager$2.run(UndoManager.java:204) at java.awt.event.InvocationEvent.dispatch(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) Root exception: java.lang.IllegalArgumentException: Don't know how to create FigEdge for model type ru.novosoft.uml.foundation.core.MCommentImpl at org.argouml.uml.diagram.use_case.ui.UseCaseDiagramRenderer.getFigEdgeFor(UseCaseDiagramRenderer.java:236) at com.genuitec.eclipse.uml.editor.undo.MementoViewModelEvent.restoreState(MementoViewModelEvent.java:184) at com.genuitec.eclipse.uml.editor.undo.UndoManager.performActualUndo(UndoManager.java:288) at com.genuitec.eclipse.uml.editor.undo.UndoManager.access$0(UndoManager.java:260) at com.genuitec.eclipse.uml.editor.undo.UndoManager$2.run(UndoManager.java:204) at java.awt.event.InvocationEvent.dispatch(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) !ENTRY com.genuitec.eclipse.uml 1 0 2006-05-21 16:19:03.815 !MESSAGE !STACK 0 java.lang.NullPointerException at org.argouml.model.uml.UmlFactoryImpl.isRemoved(UmlFactoryImpl.java:748) at org.argouml.uml.diagram.ui.UMLDiagram.needsToBeRemoved(UMLDiagram.java:680) at org.argouml.kernel.Project.trashInternal(Project.java:1049) at org.argouml.kernel.Project.moveToTrash(Project.java:1009) at com.genuitec.eclipse.uml.editor.undo.MementoViewModelEvent.restoreState(MementoViewModelEvent.java:112) at com.genuitec.eclipse.uml.editor.undo.UndoManager.performActualUndo(UndoManager.java:269) at com.genuitec.eclipse.uml.editor.undo.UndoManager.access$0(UndoManager.java:260) at com.genuitec.eclipse.uml.editor.undo.UndoManager$2.run(UndoManager.java:204) at java.awt.event.InvocationEvent.dispatch(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) !ENTRY com.genuitec.eclipse.uml 4 0 2006-05-22 09:57:58.256 !MESSAGE Exception in readDiagram !STACK 0 java.lang.NullPointerException at org.tigris.gef.presentation.FigEdgePoly.computeRoute(FigEdgePoly.java:105) at org.tigris.gef.xml.pgml.PGMLParser.endElement(PGMLParser.java:436) at org.argouml.persistence.PGMLParser.endElement(PGMLParser.java:576) at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XMLParser.parse(Unknown Source) at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source) at javax.xml.parsers.SAXParser.parse(Unknown Source) at org.argouml.persistence.PGMLParser.readDiagram(PGMLParser.java:491) at org.argouml.persistence.DiagramMemberFilePersister.load(DiagramMemberFilePersister.java:75) at org.argouml.persistence.UmlFilePersister.doLoad(UmlFilePersister.java:357) at org.argouml.persistence.ZargoFilePersister.doLoad(ZargoFilePersister.java:353) at com.genuitec.eclipse.uml.model.UMLProject.loadArgoProject(UMLProject.java:119) at com.genuitec.eclipse.uml.model.UMLProject.getArgoProjectRef(UMLProject.java:74) at com.genuitec.eclipse.uml.model.UMLModelManager.getArgoProject(UMLModelManager.java:69) at com.genuitec.eclipse.uml.editor.UMLEditor$1.run(UMLEditor.java:255) at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:346) at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:291) at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:447) at com.genuitec.eclipse.uml.editor.UMLEditor.dispose(UMLEditor.java:248) at org.eclipse.ui.internal.WorkbenchPartReference.doDisposePart(WorkbenchPartReference.java:659) at org.eclipse.ui.internal.EditorReference.doDisposePart(EditorReference.java:271) at org.eclipse.ui.internal.WorkbenchPartReference.dispose(WorkbenchPartReference.java:628) at org.eclipse.ui.internal.WorkbenchPage.disposePart(WorkbenchPage.java:1439) at org.eclipse.ui.internal.WorkbenchPage.handleDeferredEvents(WorkbenchPage.java:1266) at org.eclipse.ui.internal.WorkbenchPage.deferUpdates(WorkbenchPage.java:1250) at org.eclipse.ui.internal.WorkbenchPage.closeEditors(WorkbenchPage.java:1224) at org.eclipse.ui.internal.WorkbenchPage.closeAllEditors(WorkbenchPage.java:1035) at org.eclipse.ui.internal.CloseAllAction.run(CloseAllAction.java:80) at org.eclipse.jface.action.Action.runWithEvent(Action.java:996) at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:538) at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:488) at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:400) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:843) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3080) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2713) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1699) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1663) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143) at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103) at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334) at org.eclipse.core.launcher.Main.basicRun(Main.java:278) at org.eclipse.core.launcher.Main.run(Main.java:973) at org.eclipse.core.launcher.Main.main(Main.java:948) !ENTRY com.genuitec.eclipse.uml 4 0 2006-05-22 09:57:58.356 !MESSAGE An error occurred while loading PGML
cetekMemberI’m getting the same thing, I’m loosing days of work because of this:
java.lang.IllegalArgumentException:
at org.eclipse.core.internal.runtime.Assert.isLegal(Assert.java:58)
at org.eclipse.core.internal.runtime.Assert.isLegal(Assert.java:42)
at org.eclipse.core.runtime.Status.setMessage(Status.java:174)
at org.eclipse.core.runtime.Status.<init>(Status.java:81)
at org.eclipse.ui.WorkbenchException.<init>(WorkbenchException.java:38)
at org.eclipse.ui.PartInitException.<init>(PartInitException.java:36)
at com.genuitec.eclipse.uml.editor.UMLEditor.init(UMLEditor.java:763)
at org.eclipse.ui.internal.EditorManager.createSite(EditorManager.java:778)
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:596)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:384)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:552)
at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:223)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2362)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2295)
at org.eclipse.ui.internal.WorkbenchPage.access$9(WorkbenchPage.java:2287)
at org.eclipse.ui.internal.WorkbenchPage$9.run(WorkbenchPage.java:2273)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2268)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2249)
at org.eclipse.ui.ide.IDE.openEditor(IDE.java:371)
at org.eclipse.ui.ide.IDE.openEditor(IDE.java:334)
at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:251)
at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:131)
at org.eclipse.jdt.internal.ui.actions.OpenActionUtil.open(OpenActionUtil.java:49)
at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:169)
at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:153)
at org.eclipse.jdt.ui.actions.SelectionDispatchAction.dispatchRun(SelectionDispatchAction.java:222)
at org.eclipse.jdt.ui.actions.SelectionDispatchAction.run(SelectionDispatchAction.java:198)
at org.eclipse.jdt.internal.ui.packageview.PackageExplorerActionGroup.handleOpen(PackageExplorerActionGroup.java:296)
at org.eclipse.jdt.internal.ui.packageview.PackageExplorerPart$4.open(PackageExplorerPart.java:869)
at org.eclipse.jface.viewers.StructuredViewer$2.run(StructuredViewer.java:741)
at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
at org.eclipse.core.runtime.Platform.run(Platform.java:783)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:44)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:148)
at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:739)
at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:968)
at org.eclipse.jface.viewers.StructuredViewer$6.handleOpen(StructuredViewer.java:1067)
at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:243)
at org.eclipse.jface.util.OpenStrategy.access$2(OpenStrategy.java:238)
at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:277)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:843)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3125)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2758)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1699)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1663)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143)
at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103)
at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
at org.eclipse.core.launcher.Main.run(Main.java:973)
at org.eclipse.core.launcher.Main.main(Main.java:948)
Riyad KallaMemberdjhill,
I had a developer from the UML team in conjunction with me work on a few UML diagrams with comments for about 20mins each and neither of us ran into issues. THat’s not to say there isn’t an issue, we just weren’t able to trigger it, can you find a consistent set of steps to reproduce the problem?cetek,
Can you backup your UMR file, then erase it and rename the umr~ file in the same dir to umr and see if that opens? -
AuthorPosts